Wireless Motion Alert 2500 Kit

SKU: DCMA-2500
Wireless Motion Alert Transmitter and Receiver with up to 1/2 Mile Wireless Range, 4 Zone Monitoring, Volume Control and Easy Installation.

Features:

  • Up to a 1/2 mile Transmission Range between the Motion Sensors and Receiver1.
  • Motion Sensor Detection Range of approximately 50ft.2
  • Pair Up to 4 Motion Sensors to One Receiver (additional motion sensors sold separately3)
  • Different Tones for Each Zone to easily distinguish which sensor was triggered (Classical, Westminster Chime, Ding Dong, Whistle)
  • Volume Control
  • Exit Delay so the receiver doesn't receive any signals for 5 minutes
  • Counter Function when the zone LED flashes for each time the sensor was triggered (up to 10 times)
  • Reminder Light when the light for the zone triggered stays on for 10 seconds after the motion sensor was triggered
  • Reminder Beep when the receiver beeps every 15 minutes after the motion sensor is triggered
  • One 12VDC Output (max of 400mA) and Four Form "C" Relays (rated for 24VDC at 3 Amp) which can be set to activate for 1 second, 10 seconds, 60 seconds or 10 minutes (connect additional accessories, sold separately, such as a Siren to go off when a sensor is triggered)
  • 8 Dip Switches in the Transmitter and Receiver for Coding Purposes
  • Motion Sensor with adjustable sensitivity, LED detection light (on/off), filter mode (indoor/outdoor) and 10 or 120 second reset time
  • Wall Mounting Holes on the Receiver
  • Operating Range: -30°F to 110°F (-34.44°C to 43.33°C)

 

Receiver Must be Plugged into an Outlet (12VDC power adapter included). Motion Sensor is Powered by a 9-Volt Battery (not included)

 

The box includes a DCR-2500 Wireless Receiver with 12VDC Power Adapter and a DCMT-2500 Wireless Transmitter with Plate Mount, Swivel Mount and Mounting Screws. Instruction manuals for both devices.

 

1. Range will vary depending on conditions and terrain.

2. Motion detection range is approximate and depends on the conditions, amount of motion, etc.

3. Only 2500 series sensors will work with this receiver. Please make sure of the series before purchasing any additional sensors.